Travaini Travaini OILSYS Vacuum Skid

Functioning

The gas handled by the vacuum pump is discharged with some of the service oil into the special frame which acts as gas/oil separator and allows separation from the oil of any evacuated condensables.
The oil is returned to the vacuum pump by means of a circulation pump after being cooled through the heat exchanger.
The gas is vented after being filtered of any oil through the specially engineered oil demister filter. A pressure gauge at the filter housing will indicate over pressure when the oil demister filter is plugged and needs replacement.

Technical Details

• Complete vacuum package self-cooled with full recycle of oil
• Applied in industries such as brick and ceramics manufacturing, leather and wood processing, packaging and food processing etc.
• No water or other cooling liquids required.
• Vented air free of oil “smoke” or fumes.
• Capacity to handle gases with suspended particles.
• Rotating parts have no metal to metal contact and do not require any lubrication.
• Low noise level and low vibration.
• Shut-off vacuum < 10 mbar.
• Turn key and compact packages.
• Custom adaptation to meet specific installation and requirements.
• Rugged construction with maximum dependability.
• Contrary to rotary vane pumps, these liquid-ring vacuum pumps do not require lubrication, therefore contamination of oil by condensables or solid particles is not damaging.
• Inspection openings are strategically located at the separator tank-frame to facilitate maintenance and cleaning.
• Capacity up to 1500 m3/h.